How To Replace UJoints ULTIMATE Guide Using BFH

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ke1kABBG2jg

In this video I Describe how To use a ball joint press to remove and install pressed in ball joints in a lower control arm on a Ford F-150. • My Ford F-150 didn’t pass state inspection because the 2 lower ball joints were bad so I decided to change them myself to save some money. In no mechanic and ran into a few problems! • I was struggling to get the ball joints in and needed a part for the press that I did not have so I had to make something work with a piece of pipe! Oh yeah and I snapped the end of the cv joint off by Overtorquing the nut so I don’t do that! • Watch for my tips and don’t forget to comment below if you ran into the same problems • DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission and it’s no extra cost for you! This helps support the channel and allows us to continue to make videos like this. Thank you for your support. • Ball joint press kit. https://amzn.to/2SQCFlx • • Equipment I used to make this video • 1 Canon 70d camera https://amzn.to/2YwLl5M • 2 Rode Videomicro https://amzn.to/2GEclWV • 3 Samsung 128gb micro sd card https://amzn.to/2SSb8Qy • 4 Fotopro UFO 2 https://amzn.to/330kVIZ • 5 lavalier lapel Microphone https://amzn.to/2YC7RKo

#############################

New on site