Parallel Counterflow Chiller part 1 of 3

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=KhWdLYlpGf4

Parallel Counterflow Chiller part 1 of 3 • Introduction to the theory behind the Parallel Counterflow Chiller, and the parts that I have used. • 1/2” to 20mm Conduit Joiners - • http://www.ebay.com/itm/20mm-Slip-x-1... • 1/2” NPT compression fitting - • http://www.ebay.com/itm/5PCS-New-Bras... • I use Marley Pressure Pipe S1 PVC-U DN20 PN15 and the matching T joints for all other pipe work. • Marley products are NZ based and are available plumbing supplies. I suggest taking your 20mm Conduit Joiner along and test fit to make sure the inside diameter of your chosen PVC pressure pipe has a tight fit with the outside diameter of the conduit joiner. • Part 1 - • Parallel Counterflow Chiller part 1 of 3 • Part 2 - • Parallel Counterflow Chiller part 2 of 3 • Part 3 - • Parallel Counterflow Chiller part 3 of 3 • Drilling compression fittings - • Compression fitting drill out, tip in... • subscribe and share your homebrew experience with http://www.youtube.com/subscription_c... • website http://www.another1.co.nz • twitter / time4another1 • Great t-Shirt up for grabs http://www.redbubble.com/people/another1 • Music: Warp11, Red Alert https://itunes.apple.com/nz/album/red... Permission to use granted by Karl Miller of Warp11.

#############################

New on site