How To Use The Ecomax Plus Control Panels

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=L1J9e4bKHUw

The Hobart Ecomax Plus and Ecomax (pre-September 2017) models have very similar control panels. Here we show you how to use the control panel to help you navigate your way around the warewashers. • The circular button on the right hand side of the control panel is your simple off/on power button. All you need is one press to turn the machine off or on. The green light next to this button will flash when the machine is filling up with water. • Cycle 1- Short cycle • Cycle 2- Standard cycle • Once you have chosen your cycle, press the button once and the green light next to you cycle button green light will flash. This green light will continue to flash until the cycle has finished. Once finished, the green light will go solid. • The unit shows the temperature of the rinse and wash cycle with red lights in the middle of the control panel, so you can monitor this at all times. • If your machine has an in-built water softener, it will show you when you need to top up with salt. A simple blue light as shown in the video above will illuminate. • There is also a softener regeneration light, as pointed out on the video. If this light is on, the cycle will be slightly longer as the softener is regenerating. • The drain down button is next to power on button, to its left, also shown in the video. To drain the unit down, hold this button down for 5 seconds and once the unit has drained, it will rinse itself out, ready for a member of staff to clean. • Find our complete range of ecomax and ecomax plus here • http://www.eco-catering-equipment.co.... • Facebook- • / eco-catering-equipment-212549602109241 • Instagram- • @Eco_Catering_Equipment

#############################

New on site