VMware How connect Link Aggregation Control Protocol to cisco switch LACP

>> DIRECT DOWNLOAD LINK 🎞️ #1 <<

>> DIRECT DOWNLOAD LINK 🎞️ #2 <<

>> COPY / PASTE LINK PLEASE 🎞️ #3 <<

>> COPY / PASTE LINK PLEASE 🎵 MP3 <<

YOUR LINK HERE:

http://youtube.com/watch?v=LBQplcBPGXI

switch command : • Switch(config)#interface range gigabitEthernet 1/0/23-24 • Switch(config-if-range)#switchport trunk encapsulation dot1q • Switch(config-if-range)#switchport mode trunk • Switch(config-if-range)#channel-group 1 mode active • Switch(config)#port-channel load-balance src-dst-ip • Switch(config)#inter port-channel 1 • Switch(config-if)#switchport trunk encapsulation dot1q • Switch(config-if)#switchport mode trunk

#############################