How To Install Roof Ventilator In Under 5 Minutes WhirlyBird

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=LSbAqmCQAVQ

This DIY tutorial will show you how easy it is to install our Roof Ventilation units. • Also, we will look at the reasons Why your home should have one. • Before we get into How To Install Roof Ventilation units. • Let us look at why Your home should have one. • Visit Our Website https://roofinsulations.co.za/wind-tu... • Most homeowners have been in the roof crawl space. • As we know, the attic space is scorching in summer. • For obvious reasons, a hot sunny day will result in a hot attic. • One might wonder how a Whirly Bird Roof Ventilation Unit will reduce the Roof Crawl space's heat! • In fact, This is quite simple. • Heat build up in a confined space is pressure build-up. • For this reason, our roof ventilation units do not require power to operate! • In fact, they don’t even need wind to remove the heat trapped in the attic. • The hot air in the roof space! • Will be sucked out. • Most importantly, the warm air in the roof will be removed, and cooler air will remain. • This will result in a cooler home in summer. • Our Roof Whirly’s have a 5-year Guarantee. • They also have two self-lubricating bearings. • These bearings are designed to last for many years. • In the event, new bearings are required after many years of service. No problem, we will always have stock. Also fitting the bearings is simple. • Let us have a look at the Whirly Bird, Ventilation Benefits. • They will remove hot air from the roof space! • Stale air that is trapped will also be sucked out. • Another factor that most people do not think about Is the fact that! Cold, damp air in winter is also removed from the attic. • This is important Because condensation And mould are reduced significantly. • The timber and the ceiling in the roof will also have a longer lifespan. • A benefit that is often overlooked is dust, All dust in the roof is AIRBOURNE DUST. • Heat Extractors automatically remove new Airborne dust. • Let us have a look at how simple it is to install our Roof Whirly Ventilation Units. • For tiled roofs and sheeting roofs, we have specific base plates. • The Roof Ventilation units are fitted to the base plate And sealed. • This is how we install ventilation units. • First, we remove a tile as close as possible to the ridge capping. • The base plate is then fitted as a tile. • The hole is then marked with a marking pen And cut. • Once the hole is cut, we are ready to install. • Screws are fitted through the base plate into the existing batton. • Silicone sealer is added around the throat of the plate. • At this stage, The Whirly Bird Roof Ventilation unit is fitted onto the fixing plate. • The next step is important. Please note all units must be fitted level. • To get the best results, Use a Spirit Level to check. • When happy, the unit can be fixed and then Tighten the remaining screws. • Fit the remaining tiles. Double-check and enjoy a cooler healthier home. • In most cases, installing our unique Whirly Bird Roof Ventilators will take about 5 minutes to install. • Your home will now be cooler in summer for many years. • Should you need any more info, please do not hesitate to give us a call on 087 110 0229 • We also deliver the roof ventilator units countrywide. • Contact Us on TEL: 087 711 0229 • https://roofinsulations.co.za

#############################

New on site