DIY HYDRAULIC PRESS BRAKE full build

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=LZrWuJI-yxw

FOR ENGISH SUBS CHECK MY SECOND CHANNEL / abcustomsworldwide • DIY HYDRAULIC PRESS BRAKE full build • With this yet another new compilation video! • I recorded this video more than a year ago in the previeus workshop. • As a hobbyist it is quite difficult to neatly bend steel, and a professional press brake is very expensive. Delivery times at metal setting houses are often high, so you want to be able to do it yourself. • Here's the ultimate solution! • I built this press brake from UNP 100 profiles because I did not have tube profiles in stock, but a 100x100x10 tube could also have been done well. • The bending length is 750mm and the pressing force is 12 tons. • I made a 45mm wide bottom mold with which I can convert a 4mm thick plate at right angles over the entire length, and a narrower 15mm for 2mm plate. • There is an adjustable depth stop on the side so that you can set multiple settings at a certain depth / number of degrees. • On the other side I made a knob with which you can determine the speed of the upper blade. • The whole is fed on a 200 bar hydraulic unit. • • • Staal zoals vertrouwd: https://www.ijzershop.nl/ • verf zoals vertrouwd: https://www.motip.com/nl/ • Lastafel: https://lastafelshop.com/ • Lasapparatuur: https://www.laskar.nl/home.aspx?redir... • • Facebook: / abcustomsproject • Instagram: / ab_customs_projecten • Website: https://www.ab-customs.com/ • Muziek via https://www.epidemicsound.com/referra...

#############################

New on site