BW Technologies GasAlert Quattro Gas Calibration Guide by Ideal Calibrations

YOUR LINK HERE:

http://youtube.com/watch?v=M0BPVYD3MZY

For more information regarding the BW Technologies GasAlert Quattro (including helpful part numbers) please see http://www.idealcalibrations.com/bw-t... • This is a video in the How To Calibrate Your Gas Monitor series by Ideal Calibrations. All you need is trusted calibration gas (of course we recommend Ideal Gases brand), a cal cup, a regulator, and tubing. • If you have a problem during your calibration, give us a call or send it in for repair here: • https://idealcalibrations.com/gas-det... • BW Technologies GasAlert Quattro Gas Calibration Guide by Ideal Calibrations • 1. Verify gas blend and expiration date. • 2. Press and Hold Power Button wait for screen to come on then release. • 3. Press and hold power button, keep holding after it shuts off, it will start in calibration mode • Calibration Gas for the BW GasAlert Quattro is: • 25ppm Hydrogen Sulfide • 100ppm Carbon Monoxide • 50% LEL Methane • 18.0% Oxygen • Nitrogen Balance • Buy the calibration gas here: • https://idealcalibrations.com/calibra... • Buy a Regulator: • https://idealcalibrations.com/0-5-lpm... • Buy a replacement Oxygen Sensor here: • https://idealcalibrations.com/oxygen-... • If you get a bad O2 sensor, or the unit won't zero, you have two options: • 1. You can either send it in to us and we'll fix it for you (estimate $241 + ship) by going to https://idealcalibrations.com/gas-det... and filling out the form. • 2. You can order a generic brand oxygen sensor from us (same type MSA uses in this unit) for $120 + ship by going here: https://idealcalibrations.com/oxygen-... • If you have any gas monitor or calibration gas questions, please feel free to call us at 1-734-956-0539 or to email me at [email protected]. We'd be happy to answer any questions you have. • Please see our websites at: • https://www.idealcalibrations.com

#############################

New on site