How to Make a Wooden Speargun Part 5

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=MDTV-0cGDZI

/ mrmyvids4you • How to make a wooden speargun from mahogany plywood. • This is part-5 of my wood Speargun project, in this video you will see the final cutting of the stock profile using a bandsaw, after I removed two milimeters from the top face of the wood speargun using a wood jointer so the trigger mechanism seats above the top face of the speargun, next i drilled and cut the rubber bands slot on the speargun head using my small drill press machine in combination with a cross sliding tabe mounted on the drill press, creating a improvised milling machine! And finally cut the two side radius along the top face using a wood router to creat clearence for the rubber bands when the speargun is loaded! • Share this video: • How to Make a Wooden Speargun - Part 5 • Subscribe to my channel: • http://www.youtube.com/subscription_c... • Visite my channel: • / mrmyvids4you • More videos to watch: • How to Make a Wooden Speargun - Part 6 • • How to Make a Wooden Speargun - Part 6 • How To Make Speargun Replacement Bands Easy! • • How To Make Speargun Replacement Band... • Organizing hardware is the first step to organize the garage shop! • • Organizing hardware is the first step... • Thanks for watching!

#############################

New on site