Basic Animatronic Eyes

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=MMxarlotqac

I said I would do a video showing you exactly how I made Glamrock Freddy's eyes over a year ago and I saw so many of you in the comments still hoping for that video! So I hope this is somewhat helpful! I much prefer filming build logs rather than tutorials so this is the best I can do with the time I have. If you have any questions I will try my best to answer them but as the video gets older I may check them less! • Listed things I used in this video for Chica and Freddy's eyes: • -PLA [(any % infill) excluding the thin mechanical parts they were 100% infill] • -Transparent PLA [0% infill] • -Jumper cables [male to female] • -Arduino Uno (and the power cable it comes with) • Micro 90 Servos [I like the metal geared ones but if you're making smaller eyes the plastic ones are fine!] • -5volt power [ie power bank or laptop or talk batteries] • -M2 screws or tiny armature wire • -Sanding tools • -Glue /super glue / hot glue • -Paints [I use acrylic] • -Optional lubricant [I use vasealine] for the friction points • Inspro for nightmare fredbears eyes: • How to Build a Simple 3D Printed Ardu... • I hope to see you in the next video! • Time Stamps: • 00:00 Intro • 00:41 Most easy eye • 01:52 Basic eye (Freddy+Chica) • 04:00 Discussing more complex eyes • 05:35 Coding the brain • 09:43 Visualising the problem • 10:46 Using Lights • 11:13 Nightmare fredbears eyes • 12:01 Fin

#############################

New on site