BioPower Bio Wave demonstration
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=MRSP647qda4
iFixit FixHub portable soldering station REVIEW • Follow-up video: • iFixit FixHub Soldering Iron Review E... • https://www.ifixit.com/products/fixhu... • Just the iron: • https://www.ifixit.com/products/fixhu... • Schematic: • https://www.ifixit.com/Document/MeQmL... • Repair Guide: • https://www.ifixit.com/Device/FixHub_... • 3D Model: • https://www.printables.com/model/1018... • How intercreate designed the FixHub: • https://www.intercreate.io/case-stori... • 00:00 - iFixIt FixHub Portable Soldering Station • 01:26 - iFixit Screwdriver set + unboxing • 02:41 - The smart iron • 03:41 - The Portable Power hub • 05:04 - The smart iron in detail • 06:51 - Auto setup motion detection • 08:43 - Just the Tip • 11:18 - You can buy the smart iron on it's own • 11:49 - The hate screens and buttons on iron handles • 12:49 - Designed for repairability - Teardown Time • 14:51 - Schematics! • 15:16 - Concern about the battery terminal spacing • 16:01 - Designed by Intercreate • 16:47 - Complete bare PCB • 18:01 - Dum Arse Dave got the battery to go sparky-spark • 18:59 - It was DEAD out of the box!, repair time! • 20:47 - Testing the iron from an external USB-C battery bank • 22:06 - Testing the TS-80 tips • 22:23 - Power meter water test • 23:46 - Same power meter test with the JBC iron • 24:53 - Same power meter test with the TS80P iron • 25:13 - The temperature display is suspiciously consistant • 25:52 - Power up timer and temperature comparison test • 27:17 - Power up timer test on solder • 28:06 - Basic copper clad ground plane soldering test • 29:06 - Large package soldering test • 29:40 - Small package soldering test • 29:57 - Repetative ground plane solder test • 30:28 - JBC reference test on large package • 31:06 - Temperature accuracy test • 31:46 - External USB device powering featurign the µSupply • 32:02 - The magnetic stand • 34:04 - Trying the computer connection and command line serial port • 35:39 - Back to the water test with external power meter • 36:54 - Conclusion • Forum: https://www.eevblog.com/forum/blog/ee... • If you find my videos useful you may consider supporting the EEVblog on Patreon: / eevblog • Or with crypto: • BTC: 33BsprBQNBtHuVzVwDmqWkpDjYnCouwASM • ETH: 0x68114e40ff4dcdd384750500501e20acf3875f8c • BCH: 35n9KBPw9T7M3NGzpS3t4nUYEf9HbRmkm4 • USDC: 0x68114e40ff4dcdd384750500501e20acf3875f8c • LTC: MJfK57ujxy55su4XicVGQc9wcEJf6mAoXF • Web Site: http://www.eevblog.com • Store: https://eevblog.store/ • Other channels: • EEVblog2: / eevblog2 • EEVdiscover: / eevdiscover • T-Shirts: http://teespring.com/stores/eevblog • #ElectronicsCreators #ifixit #soldering
#############################
New on site