GSG16 Bolt disassembly and reassembly Also for GSG15 amp ISSC mk22 Read below

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=MeTct7s07vo

The Trigger and Bolt disassembly are separated from the Full Monty Disassembly and was done at a later date, see end of screen. • Tighten all the screws to the bolt housing prior to use or every 1000 rounds. Remember to lube inside the bolt housing after reassembly. • Firing safety pin explained. • The Bolts FCG for GSG-16, GSG-15 ISSC mk22 are interchangeable. • Note: The bolt recoil springs has two different diameter ends, the wider ones points back, the narrow end points forward. In 2021, the factory added two washers to the back of the recoil springs so that means the springs were not staying in place so if you were experiencing FTF and light strikes, might be a good idea to do the same. • Check out my other videos on the SKS, Type 81 and GSG-16, see description in. • SKS: • DIY SKS Underfolder. How to Hack Mod.... • Type 81: • DIY AK-47 magazine to fit Type 81. Ho... • GSG-16: • Pimp 20 ways GSG-16 without 522 Conve... • Disclaimer: this video is for educational purposes only, free of charge. Any part you copied is at your own risk and should be inspected by a professional prior to use. • Due to Youtube's policy. Please do NOT ask for link or post information of where to buy. • Please do not attempt to do my disassembly or mod because it's not made for novices who can't figure out what I'm doing on or off camera also due to the length of the disassembly, I don't often reassemble or include the FCG which is done separately. • If you like what I do on Youtube and you found some parts useful then please support my channel by pressing the LIKE and the subscribing buttons. If it was of no use to you then thanks for watching and please press next. Making videos are time consuming and not to mention expensive to do... Thank you.

#############################

New on site