DIY ecoGlaze Installing Fixed Sets

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Mef3X51M6FY

This video demonstrates how to fit a DIY ecoGlaze Fixed set, which is essential for sourcing and installing an acrylic panel. Before proceeding, ensure to clean all lites and their surrounds to maximize the holding power of the ecoGlaze adhesive. The installation kit includes two spacers, two adhesive tools, two sections of 4.5 millimetre acrylic panel, EMV, blue tack, a clean microfiber cloth, and scissors. • First, fit the bottom and top fixed angles. Determine the distance from the glass and prepare your own spacing tools. Test fit the bottom fixed angle and remove the liner from the back of each end. Slide the fixed angle down until it makes contact with the window surround and tack it on. • Activate the adhesive on the back by pressing the fixed angle down hard and providing point force. Fix four blobs of blue tack to hold spaces in place. Fit top moulding to the surround fitting the side angles. Test fit the left and right fixed angles, then remove the liner from each and slide it against the top and bottom fixed angles. • Subscribe now on our YouTube channel and like us on Facebook so you could get all the latest news! • / ecomasteraustralia • Visit Us At: • ecoMaster Website: https://www.ecomaster.com.au/ • ecoMaster Store: https://ecomasterstore.com.au/ • And Follow Us At: • Facebook: / ecomaster.com.au

#############################

New on site