Netgear Orbi LBR20 Voxel Firmware how to install and setup

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Mnmby6HLViA

Step by step installation and setup guide for installing Voxel's firmware on your Netgear Orbi LBR20 from someone that barely understands how to do this. • I am barely a computer guy, this is to be used only as a guide, you are responsible for what you do with your equipment. • 0:00 - Intro • 1:32 - Links to have • 2:10 - Lan Port • 2:50 - First log in • 5:07 - Downgrading Orbi firmware • 7:18 - Loading Voxel firmware • 9:00 - Revert to factory defaults • 11:10 - APN Settings • 12:05 - SSH login • 14:28 - Disable bloatware • 17:55 - Adding TTL tables • 22:11 - Band locking • 22:49 - Tower Locking • 24:00 - WiFi Kill • 25:40 - rc.local file • 26:57 - MAGIC • 32:31 - First boot with sim card • 34:10 - LTE Firmware • 36:35 - checking your TTL HL values • 37:51 - CONNECTED!!! • • Links below: • Orbi LBR20 How-To / Megathread: • https://wirelessjoint.com/viewtopic.p... • Newer firmware, installation will be the same • 9/15/2022: The link below will take you the LBR20 Voxel firmware page to find the latest version available. • https://www.voxel-firmware.com/Downlo... • • Orbi 2.5.2.20: • https://www.downloads.netgear.com/fil... • A05 DownGrade firmware: • https://www.downloads.netgear.com/fil... • AT COMMANDS (Not covered in mega thread): • Antenna Info (gives you RSRP value for each of 4 antennas): • echo -ne AT+QRSRP\ \ • | microcom -X -t 1000 /dev/ttyUSB2 • Get IMEI (check the IMEI assigned to the device): • echo -ne AT+CGSN\ \ • | microcom -X -t 1000 /dev/ttyUSB2 • Modem Thermal Readings (internal temps): • echo -ne AT+QTEMP\ \ • | microcom -X -t 1000 /dev/ttyUSB2 • Carrier Aggregation Info: • echo -ne AT+QCAINFO\ \ • | microcom -X -t 1000 /dev/ttyUSB2 • TTL Check (displays TTL value being used): • iptables -t mangle -L • HL Check (displays HL value being used): • ip6tables -t mangle -L • wifi_kill(script to shut down wifi, saved in 'scripts' folder): • sleep 120 • wifi down • rc.local file (what I put in my rc.local file to run wifi_kill script): • /opt/scripts/wifi_kill • exit 0

#############################

New on site