SPORTSTER Camshaft Install HOW TO In The Shop

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=N58QNUViVjY

In this video we do a Sportster camshaft install how to with a sweet little 2001 Sportster for a nice midrange power boost! This bike already has a 1200 conversion using some factory 2004 cylinders and a set of Wiseco 10-1 compression pistons cut for the stock 883 heads on the bike. I went through Hammer Performance for these parts due to their wealth of knowledge and solid advice on the project. Parts include a set of Andrews N2 bolt in cams with a set of S S lifters using the stock pushrods. In the future we will upgrade the bike further with cylinder head porting, larger valves, new ignition, and more! Check the links below for all the info! • Final tuning settings: • Main Jet = 195 • Pilot Jet = 48 • Fuel screws = 3 turns out • Spark plugs = NGK4339 DCPR8E (went 2 heat ranges colder) • Retarded stock 883 ignition module • Hammer Performance: • http://hammerperf.com/ • Andrews camshaft section (this bike is a 2001 so it uses the N2 option): • http://hammerperf.com/xlvalvetrain.sh... • S S Precision Lifters: • http://hammerperf.com/xlvalvetrain.sh... • Hammer Performance install guide: • http://hammerperf.com/ttxlcaminstall.... • Hammer Performance YouTube Channel: • / @hammerperformance • If you found this video helpful and wish to further support the channel you can donate to the Tip Jar by clicking the paypal link below! Anything is greatly appreciated! • https://www.paypal.com/donate?hosted_... • For daily updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms! • Instagram - / brickhousebuilds • Facebook - / brick-house-builds-1086643674690600 • Website – https://www.brickhousebuilds.com/ • #brickhousebuilds #sportstercams #sportster

#############################

New on site