Youtor
Zero Clearance Insert for Bosch Dual Bevel Glide Miter Saw
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Nusa3B18KFs
Do you have a Bosch compound miter saw? The instructions can be tricky on replacing the blade. This video demonstrates step-by-step instructions on the Bosch GCM12SD blade replacement. This saw is amazing. I know many shops and users will remove the blade guard permanently. This blade guard action is well-engineered and will not get in your way. • The Bosch Miter Saw GCM12SD can be found here - https://geni.us/yyilT. • As an Amazon Influencer, I earn from qualifying purchases. • The video also features replacing the outer blade flange with the Oshlun Laser Guide (https://amzn.to/2KPCjvW #CommissionsEarned). I'm so glad I did! • Watch these videos for some really good home improvement information: • How to Use JB Weld — • How to use JB Weld | JB Weld Original... • IKEA Blinds Installation — • IKEA Blinds Installation - Trippevals... • Blink Video Doorbell Installation Setup — • How to Install Set Up a Blink Video... • SUBSCRIBE for more helpful videos. • Bosch GSC12SD Compound Chop Saw — https://amzn.to/3Avj2VP • Oshlun Laser Guide — https://amzn.to/2KPCjvW • Makita Corded Drill — https://amzn.to/325VrKV • Ryobi Cordless Circular Saw — https://amzn.to/2Mlx1bE • Ryobi Cordless Drill Driver — https://amzn.to/3641a6z • Swanson Saw Guide — https://amzn.to/3sQ7ibx • Kreg Pocket Hole Jig — https://amzn.to/2MlV3TW • Kreg Concealed Hinge Jig — https://amzn.to/3o9XXZb • Kreg Adjustable Shelving Jig — https://amzn.to/3qNHHyN • Chapters: • 0:00 Introduction • 0:16 Remove the miter saw blade guard link knob • 0:24 Loosen the miter saw blade guard plate front screw 2 turns • 0:31 Loosen the miter saw blade guard plate rear screw 6 turns • 0:43 Rotate the blade guard plate • 0:50 Put the hole in the link arm on the rear cover plate screw • 0:58 Carefully rotate the miter saw blade while pressing the arbor lock button • 1:08 Remove the miter saw blade arbor bolt (reverse threaded) • 1:21 Drop the miter saw blade from under the blade guard • 1:27 Bring the blade up into position under the blade guard • 1:35 Place the outer miter saw blade flange on the arbor • 1:55 Reinstall and tighten the miter saw blade arbor bolt • 2:06 Remove the miter saw blade link from the rear plate screw • 2:09 Reposition the plate and tighten both plate screws • 2:16 Reinstall and tighten the miter saw blade guard link knob • 2:22 Test the blade guard action • 2:31 Return the allen wrench to its storage spot
#############################
