Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=O6rERL1QTYc
how to enable syslog in librenms with syslog alert rules | Configuring Rsyslog with LibreNMS Syslog | Solved Syslog not showing • for more settings to enable email alerts see my video on youtube • • Configuring Email Alerts Settings R... • LibreNMS Tutorials Playlist: • LibreNMS Tutorials • Install Rsyslog on Ubuntu 20.04 • https://ipcorenetworks.blogspot.com/2... • Rsyslog is the default syslogd on Debian systems and is usually installed on Ubuntu 20.04 by default. • You can verify this by checking the version of installed rsyslog. • apt list -a rsyslog • _____________________________________________________________________________ • root@SaadAtaullah:~# apt list -a rsyslog • Listing... Done • rsyslog/focal-updates,now 8.2001.0-1ubuntu1.1 amd64 [installed,automatic] • rsyslog/focal 8.2001.0-1ubuntu1 amd64 • ______________________________________________________________________________ • If for any reasons it is not installed, run the command below to install it. • ============================================================================= • apt update • apt install rsyslog -y • Once the installation is done, start and enable the rsyslog service. • systemctl enable --now rsyslog • NOW • Setup Rsyslog Server on Ubuntu 20.04 • Now that rsyslog is installed and running, you need to configure it to run in server mode. As stated above, rsyslog can be configured as client to sent logs to a central logging server or a server to receive and store logs from other systems. • In this guide, we setup Rsyslog as a server on an Ubuntu 20.04 box. • Open the ryslog configuration file for editing; • Nano /etc/rsyslog.conf • Define Rsyslog Server Protocol and Port • To begin with, define the protocol and port you want to receive logs on. • You can choose to use UDP or TCP and any port of your choice. • By default UDP syslog is received on port 514. • Enable UDP syslog reception: • Within the /etc/rsyslog.conf configuration file, uncomment the lines for UDP syslog reception in the MODULES section as shown below; • ################# • #### MODULES #### • ################# • provides UDP syslog reception • module(load= imudp ) • input(type= imudp port= 514 ) • provides TCP syslog reception • #module(load= imtcp ) • #input(type= imtcp port= 514 ) • Now we enable syslog in librenms • https://docs.librenms.org/Extensions/... • nano /etc/rsyslog.d/libre.conf • copy paste below script • Feed syslog messages to librenms • module(load= omprog ) • template(name= librenms • type= string • string= %FROMHOST-ip%||%syslogfacility%||%syslogpriority%||%syslogseverity%||%syslogtag%||%$year%-%$month%-%$day% %timegenerated:8:25%||%msg%||%programname%\ • ) • action(type= omprog • binary= /opt/librenms/syslog.php • template= librenms ) • stop • Add the following to your LibreNMS under nano /opt/librenms/config.php file to enable the Syslog extension: • $config['enable_syslog'] = 1; • Syslog Clean Up • Can be set inside of config.php • $config['syslog_purge'] = 30; • Let troubleshoot rsyslog • sudo netstat -taupn | grep syslog • nano /var/log/syslog • for more settings to enable email settings see my video on youtube • • Configuring Email Alerts Settings R... • Gmail SMTP setup settings: • • SMTP username: Your Gmail address • • SMTP password: Your Gmail password • • SMTP server address: smtp.gmail.com • • Gmail SMTP port (TLS): 587 • • SMTP port (SSL): 465 • • SMTP TLS/SSL required: yes • https://ipcorenetworks.blogspot.com/2... • Rsyslog Configuration for LibreNMS • https://github.com/stylersnico/rsyslog • #syslog #librenms #rsyslog #cisco #LibreNMS #cacti #ccna #ccnp #Rsyslog
#############################
