How To Install A SAT TV SOCKET Onto Coax Cable

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=OADaw6anakw

This video shows you how to install a satellite wall plate and connecting to a coaxial cable. This is perfect for when you want to neaten up your TV system or have flexibility if you're likely to move the TV around the room. • The tools you will need: • 1x sidecutters • 1x Stanley knife or utility blade • 1x small flat-headed screwdriver • Parts you will need • 1x satellite wallplate • coaxial cable • Step by step • 1) Using the cable cutters . cut the coaxial cable to the correct length. This needs to be short enough so that the wall plate can fit into the back box. • 2) Using the utility knife, perform a small incision around the outside of the PVC jacket around 1.5cm or half an inch away from the end of the cable, forming a ring and remove. Exposing the cable braid and screen. • 3)Fold back the cable braid and remove the screen. • 4) Around 0.5cm or 1/6 inch, using the utility knife cut back the dielectric exposing the center conductor. • 5) Loosen the screws on the wall plate and insert the center conductor into the center screw down terminal. • 6) Tighten all screws so that the center conductor and ground shield (braid) are making a secure connection. • 7) Screw wall plate into back box. • For more information on terminating coaxial cables into similar wall plates/ wall jacks for TV aerial connections. Please watch this video: • • How to terminate a coaxial cable into... • To prepare the F connectors required to connect into the front of the wallplate, please watch this great DIY video. • • How To Fit An F Connector Onto A Coax... • For more aerial and satellite information, please visit: • https://www.smartaerials.co.uk

#############################

New on site