Youtor
Slice Engineering Copperhead Guide 3D printing up to 450 degrees
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=OJGf-c0bzhQ
My Seckit SK-GO is destined to receive high end 3D printer parts, the latest being this new Copperhead hit end from Slice Engineering. It’s rated for up to 450 degrees C, so I had to purchase some ridiculously expensive PEEK filament to test it properly. • Overall, this is a quality product, but comes at significant expense. It’s really only going to be viable if you have specific requirements such as 3D printing in PEEK or ULTEM. Hopefully I have a print project in the future that can benefit from this. • The Copperhead hot end, PEEK filament and Dimifix adhesive were all purchased with my own money. All opnions expressed are my own. • Purchase the Slice Engineering Copperhead hot end: https://www.sliceengineering.com/prod... • Select a heat break, hot block and heat sink to suit your printer. You’ll also potentially need a heater cartridge, thermistor, fan, etc depending on what you want to keep from your existing setup. • The PEEK I tested: http://www.esun3d.net/products/282.html • Purchase Dimifix adhesive stick: https://www.x3d.com.au/store/product/... • Marlin PID autotune reference: https://marlinfw.org/docs/gcode/M303.... • RepRap PID tune reference: https://duet3d.dozuki.com/Wiki/Gcode#... • PEEK material reference: https://tractus3d.com/materials/peek • Models featured in this video: • Calibration cube: https://www.thingiverse.com/thing:127... • Stepper gear: https://www.thingiverse.com/thing:292... • Parametric Herringbone Gear Set: https://www.thingiverse.com/thing:24071 • Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au • Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5] • https://3dprintersonline.com.au/ • Take a look around and if you like what you see, please subscribe. • Support me on Patreon: / teachingtech
#############################
