Siemens KNX Basic Course Chapter 05 Topology

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=OJcVfiui47w

Chapter 5 Topology deals with the correct network structure of the KNX Bus System. Topology = Network structure of KNX. You will learn about lines, line segments, couplers and routers. The structure of the individual addresses is explained here. • In detail: • Glossary 0:17 • General survey of the complete network 1:03 • The first line segment: design and supply 2:22 • The Area network part 4:42 • The backbone linking up to 15 areas 6:22 • Remarks as of August 2021: You can basically connect now up to 256 devices per line, without line repeaters in between, and no more segments, if the supplies permit do to this (in accordance with the current drain of all devices in parallel) and the devices are all of type TP256. But this still has to be well considered, as that many devices also cause a higher rate of bus load! • Design of the Individual Address 8:28 • Couplers - gate function 12:46 • Filter table function for group communication 12:51 • Filtering individual addresses' traffic 13:20 • Block diagram of a coupler 13:48 • Individual addresses of couplers 15:29 • Coupler wiring in distribution boards 17:03 • Couplers or IP routers? 17:44 • Weblinks: KNX Association https://www.knx.org • KNX Online-Shop: https://my.knx.org • Siemens GAMMA: https://www.siemens.com/gamma • Siemens KNX Training: https://www.siemens.de/knx-training • Technical data downloads: https://www.siemens.com/gamma-td • Siemens support homepage: https://www.siemens.com/automation/su...

#############################

New on site