Flashing TASMOTA on a Sonoff OVERtheAIR

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=ONFhXM5R-t4

UPDATE!!!!! • Looks like the latest Sonoff firmware is allowing OtA flashing again. Here's what's known: • https://github.com/mirko/SonOTA/wiki#... • And here's a video about how to do it the new way with an exe on Win10: • • Sonoff T1 US version flashed with Tas... • UPDATE: • With version 1.6 of the stock Sonoff firmware, something has changed and OTA flashing has stopped working. If you have sonoffs with older firmware, they can still be flashed with this method. • The FTDI usb/serial adapter method for flashing will still work on the newer sonoffs. • www.DrZzs.com • www.instagram.com/drzzs • twitter: @Dr_Zzs • Buy Sonoffs: • iTead direct has the lowest price, but you have to wait a few weeks to get them: • https://www.itead.cc/sonoff-wifi-wire... • If you can’t wait, Amazon has them for a couple dollars more: http://amzn.to/2BkTviF • Flashing Tasmota onto a Sonoff board with a USB/Serial connector is pretty easy (unless you have an original Dual). But there’s another way to get your Sonoff Tasmotatized; SonOtA. Sonota.py is a python script that uses the default update pathway in the Sonoff firmware to install Tasmota. That’s crazy smart stuff. • You can read about how to do it on the wiki page for SonOtA on github: • https://github.com/arendst/Sonoff-Tas... • Steps: • Download and install Python3 (and Mac developer tools) • Or update Python3: ‘python3 -m pip install --upgrade pip’ (for mac) • Download SonOtA: https://github.com/mirko/SonOTA • Win10 install C++ tools - http://landinghub.visualstudio.com/vi... • The 2015 version and Community 2017 version • Mac install xcode tools - run: ‘xcode-select --install’ • Navigate to SonOtA directory and get all the requirements • Run: ‘pip3 install --user -r requirements.txt’ • Disable any firewalls • Press and hold the onboard button until the green light flashes rapidly. • Run SonOtA: Mac =‘./sonota.py’ Win10 = ‘python.exe sonota.py’ • Choose the IP address for the computer you’re running Sonota.py on • Input your Wifi name and password when asked • Watch for iTead Wifi SSID and select it when it’s available. • Reconnect to your home wifi when the iTead SSID disappears. • Select Final Stage Wifi SSID when it appears. • Connect to ‘sonoff-###” Wifi SSID • Configure Tasmota with your Wifi name and PW • Reconnect to your home Wifi SSID • Find the IP address for your new sonoff from your router, or something like Fing • Finish configuring Tasmota • Configure MQTT with Topic, IP address, Name and PW • Configure switches, if you plan to use GPIO pins for extra switches • Go tell someone what you just did and laugh when they look at you like you’re insane. • All done!

#############################

New on site