Wiring Of Hvac Heat Pump Electrical Installation Of AC Unit

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=OuAQkUqepuM

We describe the wiring of hvac heat pump electrical installation of ac unit or mini split heat pump. This is the electrical wiring 240 volts 15 amps and a common installation for us. • Need a new heat pump? • Here is what we recommend... • https://conqelectric.com/heat-pumps/ • • WIRE TYPE • The wiring we use is nmd90 rated indoor wire which is the same as Romex. As we have wired more than 10,000 heat pumps in our area. We have permission from our local inspection authority to reflect that. The wire however romex or nmd type is only permitted to be used as the whip portion or load side of the disconnect. The key is that we have it protected by a conduit called Non Metallic Liquid Tight Flex. This product is Uv resistant and rated for outdoors. It should be noted that this is only acceptable on the load size whip, which must be located within 6 feet of the outdoor unit. • If we transition from the house and run along the outside of the building from the power panel. We must use the approved stranded stipped wire RW- 90 type. • • This channel has a membership to Amazon Associates, an affiliate program structured to provide earned commissions by advertising or linking to Amazon.com. As well as other advertisers. • These videos are created as educational and entertainment videos on this channel. In no case are we suggesting that you do your own electrical work without a proper license to do so. Please consult your local licensed tradesperson. Conquerall Electrical Ltd is liable for incorrect information, assumes no liability for damage or injury. Check with the inspection authority and building codes in your local area. Conquerall Electrical Ltd will not be held liable for any accidental damage, negligent or injury resulting from equipment, information, electrical, tools, fire, recommended products or any items contained in this video.

#############################

New on site