How to Use WS2812B RGB LEDs with Raspberry Pi Pico using MicroPython

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=PCHahR7jBbQ

In this tutorial, we'll get some WS2812B LEDs (also known as GlowBits™ and NeoPixels) working with a Raspberry Pi Pico. If you haven't already set up Thonny for programming your Pico, follow our guide on that first here https://core-electronics.com.au/tutor... • Here is the full guide for this video https://core-electronics.com.au/tutor... • To follow along you'll need: • • A Raspberry Pi Pico • • WS2812B LEDs (we recommend GlowBit™ rainbow because the version 5 LEDs work reliably with the Pico's 3.3V logic level). • • A way to connect your Pico to your LEDs. I'm using some test clips • If you have any questions about this content or want to share a project you're working on head over to our maker forum http://coreelec.io/forum • Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for: • • Raspberry Pi Pico https://core-electronics.com.au/catal... • • GlowBit™ rainbow https://core-electronics.com.au/catal... • • WS2818 RG LED Strip https://core-electronics.com.au/compo...

#############################

New on site