CX9 4WD Light Repair Part 1

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=PDaNxgqi-44

I was able to repair my 2014 Mazda CX-9 Touring when the 4WD light went on – Error code: P1887 - AWD control solenoid circuit failure. The total repair cost less than $100 when the dealership and mechanic wanted $3000 and $1600 respectively. If you are mechanically inclined, you can do it yourself! • Resources •  Forum mazda247.com: https://www.mazdas247.com/forum/showt... •  Mazda Repair Manual: http://zinref.ru/avtomobili/Mazda/160... •  Soldering Tutorial: • How to Solder Wires Together (Best ti... •  Rear Differential Oil Change: • Mazda CX-9 Rear Differential and Tran... • Tools Needed •  Ramps •  Car Jack •  Oil Pan •  Socket Wrench •  Breaker Bar •  Impact Driver •  Metric Sizes 12, 14, 17, 18, 23, 24 •  Oil Pan Cutting Tool – Link to Amazon (You can use any metal wedge, but you don’t want to hurt the aluminum) •  Wire Cutter/Stripper •  Soldering Kit (Unless you just use crimp-connectors) •  Plastic Razor Blades • Materials Needed •  Primary Wire – 14 Gauge •  Solder/Flux (unless you use crimp connectors) •  Dielectric Grease •  Heat shrink wrap •  Permatex Gasket Remover •  Brake Cleaner •  Permatex – The Right Stuff Gasket Maker •  80w-90 Gear Oil

#############################

New on site