Youtor
VxLAN Part 5 Bridging Configuration
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=PbklbQCmsbc
Welcome to part 5, where we start on the real configuration. • In this tutorial video, we’ll move beyond the fundamentals and have a configuration technical deep dive, with VTEPs, multicast (for BUM traffic), #OSPF in the underlay, VNI’s and encapsulation (tunnels) in the overlay, all on real Cisco Nexus (NX OS) 9000 switches. • In short, this lab covers how to configure and troubleshoot VxLAN flood and learn. This also further illustrates bridging vs routing with #VxLAN. • Did you know that VTEPs are not called VTEPs on a #Nexus switch? They use a special interface called an NVE. This takes its IP address from a loopback interface. • • I also suggest reading ‘Building Data Centers with VXLAN BGP EVPN’ by Lukas Krattiger • https://click.linksynergy.com/link?id... • • Part 1: Fundamentals - An introduction or primer into the basic concepts and terminology. For example, VxLAN vs VLAN, and host vs gateway. • VxLAN | Part 1 - How VxLAN Works • Part 2: Header Format - Follow the packet flow to see the headers added to a frame. • VxLAN | Part 2 - Header Format and En... • Part 3: Spine Leaf Topology - Looks at the hierarchical architecture, and compares it to the newer spine leaf topology. • VxLAN | Part 3 - Spine Leaf Topology • Part 4: Address Learning - BUM traffic, data plane or control plane learning, multicast, and ingress replication. • VxLAN | Part 4 - Address Learning • Part 5: Bridging Configuration - A technical deep dive into flood-and-learn (bridging) and multicast configuration on Cisco Nexus 9000 switches. • • VxLAN | Part 5 - Bridging Configuration • Part 6: BGP EVPN Configuration - A technical deep dive into control plane learning (BGP EVPN) and Ingress replication configuration on Cisco Nexus 9000 switches. • • VXLAN | Part 6 - BGP EVPN Configurati... • • This video is also helpful in CCNA Data Center, CCNP Data Center, and CCIE Data Center. • 200-155, DCICT • 300-180, DCIT • 300-160, DCID • 300-165, DCII • VxLAN commands used: • Feature nv overlay • Feature vn-segment-vlan-based • Vn-segment • Show nve interface • Show nve peers • Show nve vni • / networkdirection • / netwrkdirection • / networkdirection • • This video contains affiliate links. I receive a small commission at no cost to you when you purchase using my link
#############################
