DIY PVC Pneumatic Cylinder

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=PkUXuxrAtP4

Thank you NighthawkinLight for your video inspiring me to make this!: • How To Make PVC Pistons For Air Canno... • • Parts List: • Main Body: • 2 PVC of whatever length you want • 2X 2 PVC threaded female adapters • • Piston Rod: • O Ring - https://www.amazon.com/gp/product/B00... • 1 1/4 PVC cap • 1 1/4 to 3/4 PVC threaded female adapter • 3/4 PVC threaded male adapter • 3/4 PVC 3-4 longer than the 2 PVC for the main body • 3/4 PVC coupler • • • Back End Cap: • 2 Theaded PVC plug • OR • 2 to 1 1/2 threaded PVC adapter • 1 1/2 Threaded PVC plug • • Front End Cap: • O Ring - https://www.amazon.com/gp/product/B00... • Short piece of 1 1/4 PVC • 2 PVC threaded male adapter • 2 to 1 1/4 PVC reducer • • Other stuff needed to get it to move: • Air compressor • Pnuematic solenoid valve - https://www.amazon.com/gp/product/B01... • A 12v power supply to trigger the solenoid, I like these LED power supplies, but they are beyond overkill for the power you need for this - https://www.amazon.com/Voltage-Transf... • Quick connector fittings - https://www.amazon.com/gp/product/B07... • Air hose line - https://www.amazon.com/gp/product/B01...

#############################

New on site