Salt Testing by Salt Contamination Meter Prior to Coating Application

YOUR LINK HERE:

http://youtube.com/watch?v=PmK-383k5IM

In the last few years, the coating industry has become far more aware of the degree of premature coating failure caused by soluble salts left upon the substrate prior to the coating application. Soluble salts that contaminate a surface are typically invisible, therefore some method of testing must be performed to determine if such contamination exists. If the contaminants are not removed, it may lead to loss of adhesion, blistering, and corrosion continuing beneath a coating. • A project coating specification often specifies to measure the salt level prior to the coating application, and the coating inspectors are specially appointed persons who carry out the salt test and document the results • This video explains how the soluble salt level is checked using the SCM 400 instrument following SSPC G15 guidelines. • Click the below link for more valuable videos related to protective coatings; • Environmental Test by hygrometer; • 👉 • Hygrometer — How to Use Whirling Hygr... • Salt Test by Bresle Patch; • 👉 • Salt Test, Soluble Salt Test Method —... • Environmental test by dew point meter; • 👉 • 🆕Dew Point, Dew Point Temperature - H... • Painting or coating? • 👉 • Hygrometer — How to Use Whirling Hygr... • Corrosion under insulation; • 👉 • 🆕Corrosion Under Insulation — What Is... • Learn more about the QA/QC Inspector course offered by IOGS; • 1. Coating Inspector Level 2 - Online Course • 👉https://www.iogs.org/coating-inspecto... • 2. Insulation Inspector Level 2 - Online Course • 👉https://www.iogs.org/insulation-inspe... • 3. Fireproofing Inspector Level 2 - Online Course' • 👉https://www.iogs.org/fireproofing-ins... • Enroll an Online course by clicking the link below; • 👉https://www.iogs.org/fireproofing-ins... • Visit the IOGS website by clicking the below link • 👉https://www.iogs.org/

#############################

New on site