How to upgrade your Rockshox Pike travel from 150mm to 160mm

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Pyi38TPkjQ0

IMPORTANT UPDATES: • 1. Rather than removing your brake lever from the bars, it is best practice to remove your brake caliper from the fork to avoid any oil ruining your brake pads. • 2. At the 2:45 mark you will see that we use a rubber mallet to smash the lowers off. This is incorrect. To properly remove the lower, you should use a rubber or plastic mallet to firmly strike each bottom bolt to dislodge the air and damper shafts from the lower leg. Then Firmly pull the lower leg downward until oil begins to drain. Continue pulling • downward to remove the lower leg from the fork. • Step by step instructions on how to upgrade your Rockshox Pike from 150mm to 160mm of travel. Follow along as my good friend Fitzy teaches me how to change my Pike shaft at home using only basic tools, and some neat tips and tricks. Make sure you subscribe to keep learning all about bike maintenance with me!

#############################

New on site