Chlorinator Off No Cell Power DIY Repair

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Q1fb4pyifsc

!!! IMPORTANT: Please read the full description for important safety information !!! • !!! WARNING!!! (Shut Power Off At Main Panel!) !!! • ** I would HIGHLY recommend going to the main breaker panel for the house and switching off the breaker that feeds power to the pool controller sub panel. ** • To see close up photos of my board and additional information about GLX-PCB-MAIN board repairs please visit the support page on my website: https://fiveable.com/support/ • How to easily repair a Hayward Goldline Aqua Plus salt water pool system that is giving a “Chlorinator Off No Cell Power” message. • Minimum Tools Needed: • 1) Screwdriver or socket driver that fits bolts on face plate and circuit board • 2) Soldering Iron 10-25 watt should work fine • 3) Electrical Solder with Rosin Core • Timestamps: • 00:00 Intro • 00:23 The Problem • 01:05 Turning Off • 01:40 Disclaimer • 02:07 At Your Own Risk! • 02:18 Removing The Face Plate • 02:36 WARNING!!! (Shut Power Off At Main Panel!) • 03:42 Removing The Display/Control Panel • 04:25 Removing The Circuit Board • 05:12 Identifying The Bad Connection • 05:48 Soldering Iron Information • 06:14 Soldering The Bad Connection • 06:47 Inspecting The Repaired Connection • 07:10 Remounting The Circuit Board • 07:46 Reinstalling The Display/Control Panel • 09:12 Reinstalling The Face Plate • 10:24 Plug The Cell Back In • 10:36 Power Back Up And Check Messages • 10:46 Check Messages • 11:09 The Message Is Gone! • 11:24 Recap of Tools Needed • 12:02 Outro

#############################

New on site