Allison Transmission LCT 1000 TransGo Kit Installation

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Q9z8lYoxSP0

Upgrading an Allison LCT 1000 Transmission: A Step-by-Step Guide • I. Preparing the C1 and C2 Clutch Drums • A. Modifying the Pump Cover (0:00-0:35): This section outlines the initial steps, including drilling holes in the pump cover and installing orifice cup plugs. • B. Assembling the C2 Drum (0:36-1:35): This section focuses on assembling the C2 drum, starting with the installation of the C2 return spring, followed by the C1 piston and snap ring, the C2 apply piston and spring cage, and finally, the C1 apply piston and its return spring. • C. Completing the Drum Assembly (1:36-2:30): This section details the completion of the drum assembly, involving the installation of balance pistons and snap rings for both C1 and C2, inserting the input shaft and securing it with a snap ring, adding the C1 clutches and their respective snap rings, and finally, incorporating the C1 and C2 clutch hubs, C2 friction plates, backing plate, and front sun gear. • II. Working with the Pump and Stator • A. Installing the Rotating Drum and Accessing the Stator (2:31-3:30): This section shows the placement of the assembled rotating drum into the transmission and then shifts focus to the pump stator. It highlights the removal of a valve line to access the stator components, including valves, springs, retaining clips, and the pump cover. • B. Stator Bore Preparation and Spring Installation (3:31-4:30): This section showcases the removed stator components laid out for clarity. The process of installing two new springs into the stator bore is detailed, emphasizing the potential difficulty with the orange spring and suggesting a tool for easier installation. • III. Valve Body Modifications and Assembly • A. Enlarging Valve Body Holes and Introducing Trim Solenoids (4:31-5:35): This section centers on the valve body and separator plate. It involves enlarging two holes to a specific size and introduces the trim solenoids (A and B). The original and replacement trim valves are displayed, emphasizing the presence of ribs on both versions. • B. Installing Inner and Outer Trim Valves (5:36-6:30): This section demonstrates the installation of the inner trim valves (A and B) into the valve body, ensuring the check ball and springs are correctly placed. The outer trim valves are then installed, reusing the original ones and noting that only trim valve A requires a spring. • C. Completing Valve Body Assembly (6:31-7:05): This section finalizes the valve body assembly by installing accumulators, pistons with springs, and the sun gear back onto its bracket. • IV. Upgrading the Neutral Safety Switch • A. Replacing the Neutral Safety Switch (7:06-8:10): This section emphasizes the importance of replacing the original neutral safety switch with an updated version, specifically in 4x4 models. The rationale behind this upgrade is explained, focusing on the improved moisture sealing of the new switch and its resistance to debris intrusion. The differences between the original and updated switches are visually highlighted. • V. Final Touches and Summary (8:11-8:35): This concluding section presents the finished upgraded transmission and reiterates that this process is an upgrade, not a complete rebuild. The video highlights the key components replaced, including the RPM sensor, turbine speed sensor, manual lever position sensor, and the updated neutral safety switch. The inclusion of gaskets in the upgrade kit is also mentioned. • Trans-go shift kit instrallation. • Here we see step by step on how to install a Transgo Shift kit and the most common failures that you see in this unit. This unit is built to last and is very powerful. With this kit installed it makes it more hevy duty than it already is. • SUBSCRIBE, COMMENT AND LIKE...Thank You... • Here are some hashtags for the YouTube video Allison Transmission - LCT 1000 - TransGo Kit Installation, based on the provided transcript: • #AllisonTransmission • #LCT1000 • #TransGo • #TransmissionRebuild • #ShiftKit • #TransmissionUpgrade • #4x4Transmission • #AutomaticTransmissionRepair • #DIYTransmission • #TransmissionTips • #MechanicLife • #Automotive • #Trucks • #OffRoad

#############################

New on site