Youtor
Shure Axient Digital Training – ShowLink
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=QFIvZxJPJmc
https://shu.re/2zJF2hY • In this video, we’ll show you how to use ShowLink AD610 Access Points to enable remote control and interference avoidance using Axient Digital ADX series transmitters. • Each AD610 Access Point can manage up to 24 ADX series transmitters. Transmitters within the range of an access point will automatically link. • ShowLink icons on the transmitter and receiver indicates link status and strength. • Using multiple Access Points can increase the capacity and extend the control range of your system. • Let’s start with real-time, remote control of transmitter settings such as gain, frequency, and audio muting. • When linked by a ShowLink Access Point, transmitter parameters can be managed from a receiver, Wireless Workbench, or ShurePlus Channels. • If conditions change after your sound check, you can remotely adjust the gain to get the sound right at any time during an event. • Audio mute, pads, and other parameters can be adjusted just as easily. • Automatic interference avoidance is another essential feature enabled by ShowLink. • When an AXT600 Spectrum Manager is part of your system, automatic, synchronized frequency changes happen instantly if a frequency gets hit with interference. • If interference occurs, the Spectrum Manager sends a verified backup frequency to the receiver. Through ShowLink, the new frequency is simultaneously sent to the transmitter, preventing dropouts. • ShowLink is also extremely useful for situations where you need to extend the control range and coverage over large areas. • Switching to high power mode extends the control range of the Access Point. • Strategically placing multiple Access Points opens up possibilities for uninterrupted control in large venues, parade routes, and multi-room installations. • As the transmitter moves, control will automatically pass from one Access Point to another, providing seamless control. • Opening the “Properties Panel” for the AD610 in Wireless Workbench lets you view the link relationships between Access Points and transmitters. • To help with positioning your Access Points, ADX series transmitters include a built-in ShowLink test, allowing you to map the ShowLInk coverage area and fine tune your setup. • Access the ShowLink test in the transmitter “Utilities” menu and do a “walk test” to check coverage levels. • As long as you see one bar or more, you’ll have full ShowLink control. • If the bars drop to zero, adjust or add more Access Points to remove any gaps in coverage.
#############################
