Micdriven speaker muting Behringer DX2000 USB

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=QV2mfcxbjLA

How to modify your Behringer DX2000 USB mixer to add mic muting (muting speakers when microphone is live). • This particular approach uses an external relay-based circuit and minimal mixer circuit interference. • WARNING: This mod will void your mixer's warranty. • --- • Diagram of the microswitch mounting: • https://twitter.com/michaeljtbrooks/s... • Parts list: • Microswitches V-154-1C25 x 2 (https://www.aliexpress.com/item/33008...) • IN4007 diodes x 2 (https://www.aliexpress.com/item/32947...) • RJ11 sockets x 2 (https://www.aliexpress.com/item/10050...) • RJ11 cable x 1 (https://www.aliexpress.com/item/32486...) • Relay x 2, 6V if wiring in series, 12V if in parallel (https://www.aliexpress.com/item/10000...) • Phono socket pair 2 pack x 1 (https://www.aliexpress.com/item/40005...) • PCB matrix board (https://www.aliexpress.com/item/10050...) • ABS plastic box x 1 sized to fit PCB (https://www.aliexpress.com/item/40007...) • Optional indicator LED (https://www.aliexpress.com/item/10050...) • Optional 680-ohm resistor for LED (https://www.aliexpress.com/item/32700...) • Equipment braided wire (any will do, e.g. https://www.aliexpress.com/item/10050...) • 8 terminal blocks (for tapping the light power feed) • Tools: • Solder + soldering iron • Dremel (for making hole in mixer and ABS case) • Drill • Glue gun (for sticking sockets into place

#############################

New on site