Arduino Nano uploading problem FIXED 1 Minute

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=QkVhP-zukZc

thanks for watching! • Don't forget to like share and subscribe • Please leave your comments below or if you have any questions. We are very grateful for your feedback and if you have any questions please comment here. • to solve this problem you need first to download this ch340g driver: • windows 10 driver:https://sparks.gogo.co.nz/ch340.html • windows 7 driver:https://github.com/HobbyComponents/CH... • go to tools board and select arduino NANO • then tools processer and select old ATmega328P (bootloader) • and finally select the right port • Error message : • ============================================================ • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xfb • avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfb Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubl... for suggestions. • =============================================================

#############################

New on site