Youtor
HorizontalFence Installation Guide DFW Fence Contractor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Qq-t3-g64GU
https://www.dfwfencecontractor.com/we... - DFW Fence Contractor installing Horizontal fence system. We are using All western red cedar and postmaster steel Posts. • Installing a Red Western Cedar fence in Dallas, Texas, requires careful planning, preparation, and execution to ensure a sturdy, long-lasting, and visually appealing result. Here's a step-by-step guide on how to install a Red Western Cedar fence: • Materials Needed: • Red Western Cedar fence panels or pickets • Fence posts (treated for ground contact) • Concrete mix • Gravel • Post hole digger • Level • Tape measure • Drill • Screws or nails • Saw (circular or miter) • Safety gear (gloves, goggles, ear protection) • Stain or sealer (optional) • Step-by-Step Installation: • Planning and Preparation: • Determine the layout and dimensions of the fence, considering property lines, terrain, and any local regulations or restrictions. • Obtain necessary permits if required by local authorities. • Calculate the quantity of materials needed based on the planned dimensions of the fence. • Marking the Fence Line: • Use stakes and string to mark the perimeter of the fence line, ensuring it is straight and level. • Mark the locations for fence posts along the string line, spacing them evenly according to the desired distance between posts. • Digging Post Holes: • Use a post hole digger to excavate holes for the fence posts. The depth of the holes should be approximately one-third of the total length of the posts, with an additional 6 inches for gravel at the bottom. • Space the post holes according to the planned layout, ensuring they are aligned and evenly spaced. • Installing Fence Posts: • Place a layer of gravel at the bottom of each post hole for drainage. • Insert the fence posts into the holes, making sure they are plumb and level. Use a level to check for vertical and horizontal alignment. • Pour concrete mix around the posts, filling the holes to ground level. Tamp down the concrete to remove air pockets and ensure stability. • Allow the concrete to cure according to the manufacturer's instructions before proceeding. • Attaching Fence Panels or Pickets: • Measure and cut the Red Western Cedar fence panels or pickets to the desired height and width. • Position the panels or pickets between the fence posts, ensuring they are evenly spaced and level. • Attach the panels or pickets to the posts using screws or nails, making sure they are securely fastened. • Finishing Touches: • Trim any excess length from the fence panels or pickets if necessary. • Apply a coat of stain or sealer to the Red Western Cedar to enhance its natural beauty and protect it from the elements. Allow the stain or sealer to dry completely before using the fence. • Maintenance: • Regularly inspect the fence for signs of damage or wear, such as loose screws or nails, warping, or rot. • Clean the fence periodically to remove dirt, debris, and mildew. • Reapply stain or sealer as needed to maintain the appearance and durability of the Red Western Cedar. • By following these steps, homeowners in Dallas, Texas, can successfully install a Red Western Cedar fence that enhances the beauty, privacy, and value of their properties while providing reliable security and durability for years to come. • www.dfwfencecontractor.com • 817-886-0848
#############################
