How To Make A Garden Flower Diy Planter Box

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=RLyYaF5ilRM

In this video I got an idea on how to make a diy planter box so I've made a design of some Large wooden garden flower diy planters. The Flower diy planter is really easy to build. To make the diy planter project all I used was some 13 mm ply 50 x 50 pine and 25x25 pine. • The total height of the diy planter is 475mm tall and 546mm square. I'd cut the four legs for the diy planter using 50x50 pine at 450mm and then routed a 13mm chanel on two sides at 10mm deep. I never went all the way down the legs with the chanel i stopped 50mm from the end of the legs. I then cut the 13mm ply into four 400mm squares. From there i then routed 5mm deep grooves every 100mm to give the effect of separate panels. Now that the planter side panels are made I test fitted them prior the glue to make sure they all fit. • After glueing up I then started making the edge around the inside bottom of the planter now this would be for an insert i made these out of 25mm x 25mm and glued them in place. • I then started with the top of the flower planter using 70mmx25mm pine i cut four pieces at 546mm and cut a 45 angle on all the ends. I then used a biscuit joiner to line up the corners and glued and clamped them in place. ?To attach the top edge i just drilled through the top of the planter top with a 6mm drill and fitted dowels to secure the top edge. • After all the glue had dried I sprayed the garden flower planters with garden shades in a colour called muted clay. They really turned out great. • If you liked the video please give me a thumbs up and subscribe. A free Sketchup file is available from my website. • http://www.shopmad.co.uk/index.php/bu... • Thanks for watching

#############################

New on site