Youtor
Injection Molding 101 Draft Angles
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=RMO2u9GyIz4
Draft angles allow for removal of the plastic from the mold. Without draft angles, the part would offer significant resistance due to friction during removal. Draft angles should be present on the inside and the outside of the part. • The deeper the part, the larger the draft angle. A simple rule of thumb is to have a 1 degree draft angle per inch. Not having enough draft angle may result in scrapes along the sides of the part and/or large ejector pin marks (more on this later). • For more, read our Injection Molding Guide: https://www.jayconsystems.com/tutoria... • Get an instant injection molding quote with or without a part: https://www.jayconsystems.com/injecti...
#############################
