Youtor
Days of Elijah with Lyrics Donnie McClurkin
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=RvBry_zXIIo
Follow along with this helpful video for instructions on how to adjust your VorMax Toilet Flush Valve settings. • STEP 1: Begin by turning off the water supply. Then, drain the tank by holding down the handle or lifting the valve chain inside the tank. • STEP 2: Depress the trip lever all the way – make sure the hook is fully engaged under the tab on the valve body. If not, slightly adjust the screw to make sure the hook is engaged. • STEP 3: Adjust the screw on the teeter bar so that the back of the flapper touches the frame stop. • STEP 4: Turn the water supply back on. To ensure the water level is properly set, measure ¼” from the top of the overflow tube. That is where the water should stop. • STEP 5: Prime the bowl by flushing approximately 5 times – with 30 second intervals between flushes. • Your VorMax toilet is now ready for use. • Subscribe to our Channel: • http://www.bit.ly/AmericanStandardSub... • American Standard on Facebook: / americanstandardplumbing • American Standard on Twitter: • / amstandard • American Standard on Instagram: / american_standard • American Standard on Pinterest: / amstandard • Find More Great Videos from American Standard: / americanstandard01 • Check out our Luxury Bathroom Products at DXV by American Standard: • / dxvluxury
#############################
