TJCanoe Part 14 SelfDesigned Plywood Canoe Free Plans

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=SJfymMnoeho

This video series is about a DIY canoe made from plywood, which I designed and made myself. I decided to make a cheap canoe, which can be built in a rather short time. So this canoe is made of plywood and built with the stich and glue technique. The wood I used, in the end, was pine and it was actually waterproof. • In This first part I show you how I came from the idea to my CAD-model, made the plans and templates and started cutting out all parts of the hull. All plans and templates were made in Lockdown when I had enough time for this. • Requirements: • Min. Time: 70h • Min. Workspace: 6 m * 3 m • Power Tools: Jig Saw, Eccentric Grinder, Circular Saw, Router, Vacuum Cleaner • Bill of Materials: • 3 Sheets of Plywood (250 * 120 cm) • Wood for Gunwales, seats • Epoxy 2.5 kg, Cotton powder 1l • Varnish 2.5 kg • 2 Sheets of Fiberglas 160 g/² (1.5 * 5m) • Total Dimensions: https://drive.google.com/file/d/18Vvr... • Arrangement on Plywood: https://drive.google.com/file/d/1_hf6... • Plans in DIN A0: • Bottom 1 https://drive.google.com/file/d/1j3Rj... • Bottom 2 https://drive.google.com/file/d/1K3Gj... • Planks 1 https://drive.google.com/file/d/1A8hU... • Planks 2 https://drive.google.com/file/d/1q3E3... • Scarf-Joint-Jig: • Homemade Jig For Cutting Scarf Joints... • _______________________________ • Instagram: / tinkererjake

#############################

New on site