Youtor
TPLink Archer C20 Setup and Full Configuration
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=SKPWg955CVM
TP-Link Archer C20 Setup Step by Step Tutorial. TP-Link Archer C20 AC750 Dual Band Router Setup and Full Configuration. • TP-Link Router Setup Archer C20 AC750 Wireless Dual Band Router. TP-Link Archer C20 Configuration Easy Method. How to Setup your TP-Link Archer C20 Wireless Router Step by Step Tutorial. If you want to Setup your TP-Link Archer C20 wifi router, this video is for you. • **How to Setup TP-Link Archer C20** • 01. Connect the Ethernet cable from your internet service provider to the WAN or Internet port on the back of the TP-Link Archer C20 router. • 02. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby. Then power on your TP-Link Archer C20 router. • 03. Connect your Mobile Phone or Computer to the TP-Link Archer C20 router using an Ethernet cable or wi-fi. The default Network Name and Password are usually on a sticker on the bottom of the TP-Link Archer c20 wi-fi router. • 04. Once your Mobile Phone or Computer is connected to the TP-Link Archer C20 router. Open a web browser, and type tplinkwifi.net. in the address field, and then press enter to visit the TP-Link Archer C20 router’s web management page. • 05. Create a Login password. For security, please create a Login password for management. TP-Link Archer C20 router recommends that your password meets the following conditions. Must contain no space. Must be 6-32 characters long. Must contain at least two types of the following characters: letters, numbers, and symbols. • 06. Then, click on Start. • 07. Run the quick setup to manually configure your internet connection and wireless settings. To continue, please click the Next button. • 08. Choose Operation Mode: Wireless Router. • 09. Then, click on Next. • 10. Select your connection type. If your internet service provider gives you public IP or static IP address. Select the static IP boxes. If your ISP provides a PPPoE username and password. Select your connection type PPPoE. • 11. Then click on next. • 12. Please enter your PPPoE username and password given by your internet service provider. • 13. First type your PPPoE username. Then, type your PPPoE password. Confirm your PPPoE password. • 14. Then click on Next. • 15. Under wireless dual band selection. Please select the check box to enable the 2.4GHz and 5GHz radio band. • 16. Then click on Next. • 17. Customize your 2.4g wireless network name (SSID) and wireless network password (wi-fi password). Enter the wireless network name SSID for your 2.4g band wireless network. • 18. Type the password you have chosen in the box next to the password for the 2.4g band. Wi-Fi password must contain at least 8 characters. • 19. Then click on Next. • 20. Confirm or change the wireless network name SSID. Type the wireless network name SSID for your 5g band wireless network. • 21. Type the password you have chosen in the box next to the password for the 5g band. Wi-Fi password must contain at least 8 characters. • 22. Then click on Next. • 23. The quick setup is complete. Please confirm all parameters below. Click back to modify any settings for click save to save and apply your configurations. • 24. Click on Save to finish the TP-Link Archer C20 Router Setup and Configuration. • TP-Link Router-Related Videos: • TP-Link Archer C60 Router Setup: • TP-Link Archer C60 Setup and Full Con... • TP-Link TL-WR850N Router Setup: • Tp-Link TL-WR850N 300Mbps Wireless N ... • TP-Link TL-WR841N Router Setup: • TP-Link TL-WR841N Setup and Full Conf... • SOCIAL • =============================== • Blog: https://www.wifiremon.com • Facebook Page: / wifiremon • Twitter: / wifiremon • Instagram: / wifiremon • LinkedIn: www.linkedin.com/in/wifiremon • #tplink • #tplinkrouter • #tplinkarcherc20 • #tplinkarcherc20setup • #tplinkroutersetup • #wifiremon
#############################
