How to Replace Front CV Axle 200308 Toyota Matrix

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=SePRW-RTYX4

Buy Now! • New CV Axle Assembly from 1AAuto.com https://trq.video/ia-1AAXS00189 • A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2003-2013 Toyota Matrix. • • Check here for more videos on the 2003-13 Toyota Matrix: • Toyota Matrix 1st Generation 2003-13 • This repair was done on a 2005 Toyota Matrix Base 1.8L Wagon 4-Door and the process should be similar on the following vehicles: • 2003 Toyota Matrix • 2004 Toyota Matrix • 2005 Toyota Matrix • 2006 Toyota Matrix • 2007 Toyota Matrix • 2008 Toyota Matrix • Tools you will need: • • Pry Bar https://trq.video/oyb-1AXAA00020 • • 18mm Socket • • 21mm Socket • • 30mm 12-Point Socket https://trq.video/oG-1AAST00002 • • 1/2 Inch Impact Gun https://trq.video/oix-1AXAA00252 • • Ratchet https://trq.video/oaEc-1AXAA00016 • • Socket Driver • • Socket Extensions https://trq.video/oauY-1AXAA00015 • • Torque Wrench https://trq.video/oYC-1AXAA00044 • • Bungee Cord • • Copper Anti-Seize • • Liquid Thread Locker • • Center Punch https://trq.video/ogR-1AXAA00055 • • Drain Pan • • Floor Jack https://trq.video/oDh-1AXAA00068 • • Hammer • • Jack Stands https://trq.video/oA9-1AXAA00065 • • Rubber Mallet • • Wheel Chocks • Subscribe: / @trq • Check out our playlist: • Toyota Matrix 1st Generation 2003-13: • Toyota Matrix 1st Generation 2003-13 • ⚠ DISCLAIMER: • While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

#############################

New on site