Howto Tip Homemade Paint Brush Spinner

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=TtSvGyBxUVI

For the companion DIY Roller Cleaner Video go here: • • How To Tip: DIY Paint Roller Cleaner • Painters know the most important trick to paint work around a job is to always have a clean paint brush available, even after a lunch break or when work stops to reset ladders and drop-cloths. • Perpetually clean paint brushes come from a 2 step process. • Step 1-- whenever the paint brush is not in use let it dangle from a rack in a 5 gallon bucket partially filled with solvent or clean water. (Important! Do not let the bristles touch the bottom of the bucket!) • If the bucket has a lid you can even transport the soaking brushes around the site • without worry they will splatter sidewalks and trim with gunk. • Then, step 2, take the brush from the bucket and spin dry it. • Commercial painters buy special tools for this task, but for household chores you can make a simple spinner with parts from a hardware store that fits into any hand cranked eggbeater drill or power drill you might have handy. • No need to spend $25.00 for a item you will rarely use when the components to do the same job are already in your toolbox. • I made my first homemade spinner many years ago from galvanized pipe parts. • Today with PVC pipe pieces you can make a spinner even better, faster and cheaper! • • Take a look! • For other tips and commentary or wildly improbable tales of Kamikaze Pigeons, Pottyology or Window Glazing visit my blog: • http://www.handyguy.wordpress.com

#############################

New on site