M8 Crankcase Venting • DIY Transmission Top Cover Vent That Works

>> DOWNLOAD LINK 🎞️ #1 <<

>> DOWNLOAD LINK 🎞️ #2 <<

>> COPY / PASTE LINK PLEASE 🎵 MP3 <<

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=U6gOhbRQrwE

I've implemented a DIY vented transmission top cover as an alternative to the failed m8 vented dipstick project that I covered in the last video. This new solution is working very well on the Softail Street Bob FXBB and I am quite pleased with it. No more Milwaukee Eight vented dipstick issues! It's easy to do and it only takes a few simple parts. Check out the video for all the details, as well as a diagram that explains what's beneath the transmission top cover and why this is such a great place to add venting. Part of my inspiration for this came from the new Trask CheckM8 solution, as well as discussions with others. • ⏱️ 𝗧𝗔𝗕𝗟𝗘 𝗢𝗙 𝗖𝗢𝗡𝗧𝗘𝗡𝗧𝗦 ⏱️ • = = = = = = = = = = = = = = = = = = = = • 00:00 Intro • 00:16 The Solution: Transmission Top Cover • 00:32 Backstory: Vented Dipstick Fail • 00:55 Original Plan Fell Through • 01:23 Welcome To Channel • 01:40 Why Vent The Crankcase? • 02:14 M8 Blow-By Proof • 02:39 Why Vent Transmission Top Cover? • 02:49 Transmission Diagram • 03:47 Check Valve? • 05:10 How I Vented The Top Cover • 07:01 Parts List • 07:19 Check Valve Issues • 09:01 Test Ride • 09:18 The Verdict: SUCCESS! • 09:24 Performance Improvement? • 09:48 Very Discreet...Invisible! • 10:09 Add A Comment • 10:37 Like, Share Subscribe :) • ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ • ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ • ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ • ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ • 𝗗𝗢𝗡'𝗧 𝗠𝗜𝗦𝗦 𝗩𝗜𝗗𝗘𝗢𝗦! Please subscribe, tap the bell 🔔, and enable all notifications to be notified: https://bit.ly/subscribe_rons_workshop • = = = = = = = = = = = = = = = = = = = = • 𝗥𝗘𝗟𝗔𝗧𝗘𝗗 𝗩𝗜𝗗𝗘𝗢𝗦 • = = = = = = = = = = = = = = = = = = = = • Crankcase Pressure Vacuum Questions Answered! •    • ✅ Answers! M8 Crankcase Pressure   Va...   • Check-Up Video: How's the Crankcase Vent Check Valve Working? •    • ❓Check-Up: M8 Transmission Top Cover ...   • Check For Sumping: Remove Crank Sensor •    • M8 • Wondering If You Have A Sumping ...   • Crankcase Vacuum / Pressure Testing •    • M8 Crankcase Pressure OR Vacuum? • Cr...   • Vented Dipstick FAIL •    • But There's Still Hope • DIY Vented D...   • Arlen Ness Monster Sucker External Breather Mod •    • Monster Sucker Mod • Arlen Ness Exter...   • Blackening Brass Fittings •    • DIY Black Brass Fittings • Chemical D...   • DIY Vented Dipstick Fail •    • But There's Still Hope • DIY Vented D...   • Street Bob FXBB Milwaukee 8 Stage III •    • Want Stage 3? Watch First • See   Hea...   • M8 Stage III Fuel Economy •    • Street Bob Fuel Economy • Milwaukee 8...   • = = = = = = = = = = = = = = = = = = = = • 𝗣𝗔𝗥𝗧𝗦 𝗟𝗜𝗦𝗧 • = = = = = = = = = = = = = = = = = = = = • You can use 3/16” or 1/4” fittings, and both are listed below. 1/4” will give more airflow but it’s not necessarily required. I originally used 3/16” but I’d go with 1/4” if I did it again, or even 5/16 . • 3/16” Bulkhead Hose Barb Fitting* • https://amzn.to/3lGG2do (Brass) • 3/16” Cole-Parmer Check Valve* • (The best one I've found so far!) • https://amzn.to/2P4qpQs (probably out of stock) • https://bit.ly/3EZ3D3H (Direct From Manufacturer) • 3/16 Check Valve (eBay - Untested)* • https://ebay.to/3nMYenk • 3/16” to 3/8” Barb Splice (For Uni Filter)* • https://amzn.to/3gnld4A (Stainless Steel) • https://amzn.to/3d03EqR (Brass) • 3/16 Silicone Vacuum Hose* • https://amzn.to/3mRJzHh • 1/4” Bulkhead Hose Barb Fitting* • https://amzn.to/3L50jFs (Stainless Steel) • https://amzn.to/3pcqopV (Brass) • 1/4” Cole-Parmer Check Valve* • https://amzn.to/2Ptqz3V (probably out of stock) • https://bit.ly/3ZpIhEV (Direct From Manufacturer) • 1/4 Check Valve (eBay - Untested)* • https://ebay.to/3uxaLio • 1/4” to 3/8” Barb Splice (For Uni Filter)* • https://amzn.to/32Yzd1x (Stainless Steel) • https://amzn.to/34eca3F (Brass) • 1/4” Silicone Vacuum Hose* • https://amzn.to/3HwY8Iy • Uni UP-101 Breather Filter* • https://amzn.to/3tOlsv1 • https://ebay.to/3APSXkE • https://bit.ly/3L5qgom • 5/16” Mini PCV Valve* • https://amzn.to/3KhcIor • http://bit.ly/3MgLY9A • Kobalt Mini Ratchet Kit* • https://amzn.to/3kUEjQQ • Blue HyFlex gloves* • https://amzn.to/3brbOVF • The Dorman part # that failed: 47170 • = = = = = = = = = = = = = = = = = = = = • 𝗚𝗘𝗧 𝗖𝗢𝗚 𝗟𝗢𝗚𝗢 𝗠𝗘𝗥𝗖𝗛 • = = = = = = = = = = = = = = = = = = = = • Cog logo t-shirts, hoodies, etc. • http://bit.ly/ronsworkshop_cog_logo_m... • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • 𝘛𝘩𝘪𝘴 𝘪𝘴 𝘢𝘯 𝘢𝘧𝘧𝘪𝘭𝘪𝘢𝘵𝘦 𝘭𝘪𝘯𝘬, 𝘸𝘩𝘪𝘤𝘩 𝘮𝘦𝘢𝘯𝘴 𝘪𝘧 𝘺𝘰𝘶 𝘣𝘶𝘺 𝘴𝘰𝘮𝘦𝘵𝘩𝘪𝘯𝘨 𝘢𝘧𝘵𝘦𝘳 𝘤𝘭𝘪𝘤𝘬𝘪𝘯𝘨 𝘵𝘩𝘦 𝘭𝘪𝘯𝘬 𝘐'𝘭𝘭 𝘳𝘦𝘤𝘦𝘪𝘷𝘦 𝘢 𝘴𝘮𝘢𝘭𝘭 𝘤𝘰𝘮𝘮𝘪𝘴𝘴𝘪𝘰𝘯 𝘢𝘵 𝘯𝘰 𝘢𝘥𝘥𝘪𝘵𝘪𝘰𝘯𝘢𝘭 𝘤𝘰𝘴𝘵 𝘵𝘰 𝘺𝘰𝘶. 𝘛𝘩𝘪𝘴 𝘩𝘦𝘭𝘱𝘴 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘵𝘩𝘦 𝘤𝘩𝘢𝘯𝘯𝘦𝘭 𝘢𝘯𝘥 𝘩𝘦𝘭𝘱𝘴 𝘮𝘦 𝘬𝘦𝘦𝘱 𝘮𝘢𝘬𝘪𝘯𝘨 𝘷𝘪𝘥𝘦𝘰𝘴 𝘭𝘪𝘬𝘦 𝘵𝘩𝘪𝘴. 𝘗𝘭𝘦𝘢𝘴𝘦 𝘥𝘰 𝘯𝘰𝘵 𝘴𝘱𝘦𝘯𝘥 𝘢𝘯𝘺 𝘮𝘰𝘯𝘦𝘺 𝘰𝘯 𝘵𝘩𝘦𝘴𝘦 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘴 𝘶𝘯𝘭𝘦𝘴𝘴 𝘺𝘰𝘶 𝘧𝘦𝘦𝘭 𝘺𝘰𝘶 𝘯𝘦𝘦𝘥 𝘵𝘩𝘦𝘮 𝘰𝘳 𝘵𝘩𝘢𝘵 𝘵𝘩𝘦𝘺 𝘸𝘪𝘭𝘭 𝘩𝘦𝘭𝘱 𝘺𝘰𝘶 𝘢𝘤𝘩𝘪𝘦𝘷𝘦 𝘺𝘰𝘶𝘳 𝘨𝘰𝘢𝘭𝘴. 👍🏼 𝘛𝘩𝘢𝘯𝘬 𝘺𝘰𝘶 𝘧𝘰𝘳 𝘺𝘰𝘶𝘳 𝘴𝘶𝘱𝘱𝘰𝘳𝘵! • #transmissiontopcover #m8blowby #softail #fxbb #streetbob #ronsworkshop • DIY vented transmission top cover on my Harley-Davidson Street Bob FXBB with the 114 Stage III Screamin' Eagle kit.

#############################