Youtor
Voice Control Home Automation System using Arduino Voice control DIY
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=UUOdsxOYIWA
Voice control home automation system using Arduino || Voice control DIY • Scroll down for code..... • Please like Subscribe for more videos • App link • https://play.google.com/store/apps/de... • If you want to support my video please buy any product through my amazon affiliate link. I will receive a commission, at no extra cost to you. • LIST OF COMPONENT (affiliate links) • http://amzn.to/2fvSRJq (Arduino) • https://amzn.to/2JtsiPs (Bluetooth module HC-05) • http://amzn.to/2y8horo (Relay Module) • http://amzn.to/2vmSK8l (1k 2k ohms Resistor) • http://amzn.to/2wxPmWz (Breadboard) • http://amzn.to/2vJ3lvo (Jumper wire) • char data = 0; //Variable for storing received data • void setup() • { • Serial.begin(9600); //Sets the data rate in bits per second (baud) for serial data transmission • pinMode(13, OUTPUT); //Sets digital pin 13 as output pin for Light • pinMode(12, OUTPUT); //Sets digital pin 13 as output pin for Fan • } • void loop() • { • //instead of parenthesis () put angle bracket as YouTube description does not allow angle bracket • if(Serial.available() ) 0) // Send data only when you receive data: • { • data = Serial.read(); //Read the incoming data and store it into variable data • // For Light • if(data == '1') //Checks whether value of data is equal to 1 • digitalWrite(13, HIGH); //If value is 1 then Light turns ON • else if(data == '0') //Checks whether value of data is equal to 0 • digitalWrite(13, LOW); //If value is 0 then Light turns OFF • // For Fan • else if(data == '2') //Checks whether value of data is equal to 2 • digitalWrite(12, HIGH); //If value is 2 then Fan turns ON • else if(data == '3') //Checks whether value of data is equal to 3 • digitalWrite(12, LOW); //If value is 3 then Fan turns OFF • //For ALL ON or OFF • else if(data == '4') { //Checks whether value of data is equal to 4 • digitalWrite(13, HIGH); //If value is 4 then Light turns ON • digitalWrite(12, HIGH);} //If value is 4 then Fan turns ON • else if(data == '5') { //Checks whether value of data is equal to 5 • digitalWrite(13, LOW); //If value is 5 then Light turns OFF • digitalWrite(12, LOW); } //If value is 5 then Fan turns OFF • } • }
#############################
