I made a Pull Copter Finger Ring Fulcrum Minibot First Impressions

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ul6tzKezKa0

Gearbest sent me their Fulcrum Minibot 3D Printer for testing. The Minibot is a tiny and adorable Core XY (after some research this seems to be a Hbot Setup, not Core XY?) 3D Printer that only measures 210x210x220mmwith a 75x70x70mm build area. I decided to put the machine to the test by designing and printing a toy with mechanical parts. Lets see how well it did the printing job. The Pull Copter is assembled using M2x8 Hex Cap screws • Affiliate links: • MINI ES121 Electric Screwdriver: • https://www.banggood.com/Upgraded-MIN... • My initial impression of this 3D Printer: • Pros: • Adorable machine with a small footprint. Can print very nice but require additional cooling for best results. Affordable. Solid built frame • Cons: • Did arrive with a shaft knocked loose which had to be reattached, I suspect this is due to a design flaw. The parts cooling is not optimal. Tiny build surface. Not very silent when printing. Spoolholder does not fit regular sized spools • The filament used in this project was provided to me by Fillamentum: • https://fillamentum.com/ • Subscribe or follow me on • Instagram: • / agepbiz • Twitter: • / agepbiz • Music: • Soul Searching by Causmic • / l33tpwned • 3d printable files: • Cults: • https://cults3d.com/en/3d-model/gadge... • PrusaPrinters: • https://www.prusaprinters.org/prints/... • Thingiverse: • https://www.thingiverse.com/thing:450... • MyMiniFactory: • https://www.myminifactory.com/object/...

#############################

New on site