Youtor
Using the Estes Igniters and Plugs Successfully in Model Rocket Motors
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=UtrpU4YPfEs
A field test of the IGNITE firing system firing two clip-on igniters on one cue, plus advice on how to wire this up. Two is the maximum number of this type of igniter IGNITE's website suggests you should fire, but I press on and try three then four together. • If you're already familiar with igniters and how to wire them up, use the video chapters to jump straight to the field tests: • 0:00 Introduction • 0:29 Wiring Guide (strip twist) • 4:09 Wiring Guide (WAGO connectors) • 6:08 Field Test - 2 Igniters • 6:33 Wiring Guide (5m extensions) • 8:09 Field Test - 2 Igniters @ 5m • 8:45 Wiring Guide (3 igniters) • 10:21 Field Test - 3 Igniters • 10:37 Wiring Guide (4 igniters) • 10:54 Field Test - 4 Igniters • 11:35 Connectors and bell wire advice • Have you seen my in-depth first look at this new firing system? If not check out my YouTube video: • • IGNITE Fireworks Firing System First ... • UPDATE: Since filming this I have purchased an official breakout board: • https://www.ukfr.com/quickplug-breako... • This is an easier way of doing this if you're using official igniters. I also fired FIVE igniters with no issues.
#############################
