Zircon Tip Minute 3 How to Use a Stud Finder

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=UuxCVGTKID4

How to Use a Zircon Stud Finder. This is the third of many Zircon Corporation Tip Minutes with Eric, the Zircon Tip Guy. In this Tip Minute, Eric shows you how easy it is to find the edges and center of a stud using a Zircon MultiScanner™ i520 OneStep wall scanner and tips on how to mark them. • Indoor Use Only * • For more information about Zircon stud finders and other products: • https://www.zircon.com/tools/multisca... • / zircontools • / zircontools • / zircontools • A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. * https://www.zircon.com/2014/06/11/how... • 1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays) • Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (40 – 60 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting. • WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.

#############################

New on site