VW Golf 20TDi EGR Removal Clean amp Refit

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=VITKRj9vHVk

VW Golf 2.0TDi -- EGR Removal, Clean Refit • I had an oil leak between my EGR valve and the anti shudder valve in the intake. I remove both components, clean, replace gaskets and refit. • It's quite a fiddly job but can be done with some patience. • If you're planning to do the same you will need: • Tripple square / spline socket set (EGR pipe) • Torx socket set(EGR valve) • Hex socket set (Intake removal) • 3/8 ratchet extensions (EGR valve) • 3/8 wobble joint (EGR valve) • Philips screwdriver (Intake removal) • Flat screwdriver (Wiring clips) • Torque wrench (EGR valve) • Pliers (Intake removal) • 7mm socket (Boost hose) • Torque settings: • EGR to intake manifold (8 Nm) • Anti-Shudder valve to EGR (10 Nm) • EGR pipe to EGR (20 Nm) • Parts used Affiliate Links: • EGR to intake manifold gasket - 03G 131 547 C • https://ebay.us/459qEW • Anti shudder to EGR valve - 03L 131 547 B (Elring 006.070) • https://ebay.us/c8583Q • EGR pipe to EGR - 069 131 547 D (Elring 729.970) • https://ebay.us/c8583Q • EGR restrictor plate • https://ebay.us/J6s4O8

#############################

New on site