OpenWRT AP Client Wireless Client mode with LuCI amp Command Line

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=VX2PYzGMntc

In this video, we will set up AP Client / configure the wireless interface in client mode on OpenWRT, with both LuCI and the command line interface (CLI) • Long summary: We will connect the OpenWRT router to an Access Point (AP) and provide the internet connection from that interface to any other devices connected to the OpenWRT router Ethernet ports and AP, which are in the br-lan bridge interface. • Video timeframe: • 00:00 - Intro - OpenWRT AP (Access Point) STA(Station) • 00:17 - Network topology overview • 01:33 - Setup AP Client/ Wireless Client on OpenWRT LuCI • 06:35 - Test with LuCI • 10:00 - Setup AP Client/ Wireless Client on OpenWRT with Command Line Inteface (CLI) • 10:19 - Modify the wireless configuration file - /etc/config/wireless • 13:56 - Create a new wwan network interface - /etc/config/network • 14:55 - Add the new interface to WAN firewall zone - /etc/config/firewall • 16:20 - Check and Troubleshoot / Wrong encryption • 17:25 - Final checks and bmon speedtest • 21:40 - Next video spoiler • Some basic terms: • AP Client or Wireless Client mode allows the Access Point to become a wireless client to another AP. • Access Point Mode allows the wireless device to share the connection to other devices wirelessly. It is the default mode for most the wireless routers, which is also called WiFi hotspot. • OpenWRT guide for AP client, by vgaetera - https://openwrt.org/docs/guide-user/n... • Thanks for watching and see you all in the next video!

#############################

New on site