Youtor
AirPro Factory Video Tour
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=VZAIgBY1Qac
Visit https://airprofan.com/ - Call 715-365-3267 - Email [email protected] • We’re an Open Book. Take a Plant Tour with Chet to See How It All Comes Together. • Get a good look behind the scenes. We wanted to show you what goes into your industrial fans and blowers. In this action-packed 10-minute video, Senior Application Engineer Chet White walks you through our two production facilities. Looking for more information? • VISIT OUR WEBSITE: • https://airprofan.com/ • SUBSCRIBE TO OUR CHANNEL FOR OTHER VIDEO TIPS HELPFUL INFO: • / @airprofan • SUBSCRIBE TO OUR EMAIL LIST: • https://airprofan.com/contact/ • LET’S CONNECT! • Email: [email protected] • LinkedIn: / airpro-fan-and-blower • Transcript (edited): • Welcome to the AirPro Fan Blower Company in Rhinelander, Wisconsin! We start in the West Plant Receiving Bay where trucks deliver raw materials for fan wheel fabrication. After a quick tour of the holding area that houses pallets full of job-specific materials as well as a stock item storage area, we see the areas where materials get cut to size for specific projects. • Production starts with the wheel fabrication process, specialized in wheel welding. A surprise stop in a fabrication bay reveals a clean, high-quality wheel in the final stages of production. Key to consistent quality, all of our welders are certified to AWS D14.6 standard. • Next is the Balancing Station. Here, all completed wheels go through the first of two dynamic two-plane balance testing processes. We test to the minimum required specification of G6.3 based on the maximum imbalance at minimum speed in multiple runs, adding weight to either side to minimize the imbalance. • Leaving the West Facility, we move on to the North Facility about eight miles away where we complete the painting, welding of other components like housing and pedestals, assembly, final testing, and shipping. • Again starting in the Receiving Bay, we have a storage area for paint, motors, and job-specific pallets containing drive components. We move through the area where steel gets rolled and cut to the proper length for production and into the back to the High Bay, where we have a blast booth for special coatings, and two pressurized paint booths, with pressure pods for mixing. We typically paint our fans standard dark grey, but we can match any color. • On to Fan Assembly, where completed fans go through standard SP1, SP2, and SP3 cleaning processes before painting, Fan Assembly is also where we complete trim balancing. Fans are bolted down and run at operating speed before shipment. • Finally, we move to the Shipping Bay. there, our inspectors perform Quality Control checks to ensure it’s exactly what you ordered. We put on the finishing touches and load it on the truck. • Along the way, we passed a few displays highlighting features including 100% employee ownership, 95% on-time delivery requirement, Safety tally of days since the last lost-time accident (634 at the time of filming), 3-year warranty standard on all products. • VISIT OUR WEBSITE: • https://airprofan.com/ • SUBSCRIBE TO OUR CHANNEL FOR OTHER VIDEO TIPS HELPFUL INFO: • / @airprofan • SUBSCRIBE TO OUR EMAIL LIST: • https://airprofan.com/contact/ • LET’S CONNECT! • Email: [email protected] • LinkedIn: / airpro-fan-and-blower • #industrialfans #industrialexhaustfans #centrifugalfans
#############################
