Youtor
Reducer Bushing for Schedule 40 PVC Pipe Spig x Slip
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=WDd0jNj7kWE
Reducer Bushing for Schedule 40 PVC Pipe (Spig x Slip) • Buy at:http://www.flexiblepvc.net/Reducer_Bu... • The most common configuration of the Schedule 40 reducer bushings is the spig x slip reducer bushing. Reducer bushings can fit your needs when your project requires the connection of pipes of two different diameters. These fittings are slightly different than couplings, although couplings can also connect two pipes of different sizes. Bushings, unlike couplings, tend to fit inside another fitting much like a spigot fitting, allowing the user to place the bushing into the larger fitting, thus reducing the diameter that the larger fitting requires. This bushing cements inside another fitting (the outer spig part of the fitting) allowing a smaller diameter pipe to be cemented into it (the inner slip part of the bushing). In this configuration, both connections are cemented or solvent welded together. So for example, a 2 x 1 Schedule 40 spig x slip reducer bushing would work like this -- the bushing would be glued into a fitting that accepts a smooth 2 pipe or fitting. Then a 1 smooth end pipe would be cemented into the bushing, allowing the 1 pipe to fit into the 2 pipe. All of our Schedule 40 fittings are NSF rated 14 61, which means they are certified for use with potable (drinking) water. Maximum temperature is 140°F.
#############################
