Toilet wont stop running easy fix

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=WSMke-jbM-0

The Fluidmaster Fill valve (Ballcock) can suddenly quit filling or start filling very slowly. • It happens to be very sensitive to crud in the water supply and it is easily repaired. • https://mrhardware.com/store/#!/Fluid... • To clean and return fill speed back to normal follow these easy steps. • 1. First, turn off the water supply to the toilet and check by flushing the toilet and insuring no water is coming to the valve. • 2. Grab the valve stem just below the float with one hand and • 3. Lift up on the float arm on the top of the valve and twist 1/4 of a turn counter clockwise. • 4. The head can be tilted enough to remover the gasket and check for tears. • 5. Now with your hand or a cup cover the top of the exposed valve stem and turn the water back on. • 6. Turn the water on just enough to purge some water out of the valve, this will purge any rust or impurities that are interfering with proper operation. • 7. Reassemble the valve head, with the old washer or new, and turn the water back on. • Your toilet should fill like normal again! • https://mrhardware.com/store/#!/Fluid... • Learn more at: https://mrhardware.com/ • Subscribe: / @mrhardware1

#############################

New on site